Pimp my lighter…


Friction fires are the sports cars of the survival world. They are cool, sexy, and chicks dig them, but once you learn how to make one, you will always carry another way to start a fire. Don’t get me wrong, I love friction fire too, but when you really need a fire in bad weather or if you are injured, there are better choices. You show me a one-armed, 100% made in the field, friction fire set, in foul, crappy weather, and I will show you my $1.85 lighter that will accomplish the same end goal a lot quicker and can be done by the average person.

The two firestarters that I rely on a daily, are a metal match (a.k.a. firesteel, ferro rod), and a Bic lighter. Both have their strengths and weaknesses, but they complement each other well, forming a good team. The open flame of the lighter can overcome moist, unprepared, and stubborn tinder, has 1.5 hours of fuel (I have timed them), all while weighing a little over a half ounce. I will showcase my metal matches later, but your local Stop ‘n Rob can get you started on this lighter kit today.

Lighters get a bad rap from failures due to cold temperatures and from getting wet. In my region, the cold has not been an issue as I keep one in my chest pocket, under my coat. Warming them up under your armpit or crotching them are also ways to warm them up if they are being finicky. If you live way up North, my guess is that matches may be in your kit and you probably have your own solutions up there already.

While there are tricks to dry a lighter out, prevention is always best and while we are at it, we will add some waterproof tinder and an o-ring to prevent fluid leaks.

You will need:

Bic lighter – Arsonists love white lighters because you can see the fluid level. Be like the arsonist, pick white. If you already have a light colored one, you can shine a flashlight through the body to tell the fluid level. Just switch to white in the next run.

Duct tape – Orange will make your lighter stand out if dropped and can be used as improvised flagging strips, among ,many other uses.

Balloon – Orange is a good choice here too. This is ‘Ol Humpy’s signalling device for getting picked up on the lake bank.

3/4 O-ring 

Petroleum jelly soaked cotton ball in wax paper – I wrap mine in wax paper like a piece of candy. This keeps them from getting everything greasy and getting water logged if you take a swim,

Needle nose pliers


Step 1: Peel off the sticker. Pull out the child safety if you aren’t a child.


Step 2: Wrap 3 feet of duct tape around the body, just under the logo. This will still allow you to see the fluid level when you turn the lighter on it’s side.


Step 3: Slide the O-ring over the the lighter and wedge it under the button. This will prevent the lighter off gassing if the button is pressed in your pocket or pack. When you need flame, just roll the O-ring down.



Step 4: Slip the PJ ball and the lighter into the balloon and tie it off.


Now you have a 1.5 ounce pyromaniac’s delight, complete with three available tinders, an open flame source, and a mini-firesteel striker. There is even more room in the balloon for another PJ ball or two if you wish. I believe in redundancy of key items, so one balloon kit goes in my first aid kit in my pack, one balloon kit in my survival kit in my cargo pant’s pocket, and I carry a non-ballooned lighter for everyday use in my chest pocket. Putting the lighters in balloons has the side benefit of limiting use except in dire need, so keep an unwrapped one handy.


If everything is wet and you need a little help getting your fire started, the PJ ball will go for over six minutes. And thanks to the Alaskan natives that burned up all Danno’s duct tape, I learned years ago that it makes a great waterproof tinder, just don’t let it stick to your hands. By carefully untying the balloon you can re-use it, use it as a makeshift water carrier, or for signalling. Cutting or ripping it open is always an option and will yield over a minute of burn time.


Even if you use up all the gas, the lighter is still in the game. Just pop off the metal shroud and you will have access to the “flint” striker (ferrocerium for the purists out there) that will light finer tinder like cotton balls, cattail fluff, seed heads, etc.



So the next time the earth quakes, poison arrows fall from the sky, and the pillars of Heaven shake. Just do what ‘ol Jack Burton does.

Look that big ‘ol storm right square in the eye, tell it to give you it’s best shot, and flic your pimped out BigPig Bic…

Interested in learning more practical survival skills, a few spots are still available in next weekend’s class: http://bigpigoutdoors.net/survival-101-1.html


5 thoughts on “Pimp my lighter…

  1. Mike

    OK, this is a great entry. A really neat twist on the bic lighter. I never thought of an o-ring. I use a small zip tie with the extra end cut off. Plus the ballon for waterproofing, in a word; genius. I’ll bet the waxed paper holds up better than the mini ziplock bags I’ve been using.
    All that, and a “Big Trouble in Little China” refernce. Man, this was loaded with win.


Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s